๐๐ผ๐น๐ผ๐ด๐ฟ๐ฎ๐บ๐ ๐ผ๐ป ๐ฑ๐ฟ๐ผ๐ฝ๐ฝ๐ฒ๐ฑ ๐ถ๐๐ฒ๐บ๐! [1.20.80+]
![Thumbnail: ๐๐ผ๐น๐ผ๐ด๐ฟ๐ฎ๐บ๐ ๐ผ๐ป ๐ฑ๐ฟ๐ผ๐ฝ๐ฝ๐ฒ๐ฑ ๐ถ๐๐ฒ๐บ๐! [1.20.80+]](/uploads/posts/2023-09/holograms-on-dropped-items-main-cover.png)
Go to files Above each dropped item is shown text-hologram, which displays the name of the item and the amount! Compatible with all other addons! Now you can clearly identify the item from afar without looking at its texture!
Table of Contents
- List of Features
- Downloads
- How to Use
- Addon Configuration
- Changing the Hologram Pattern
- Checklist Before Adding This Addon to Your World
- FAQ
- Updated on April 28
โญ Raycasting! Holograms are only displayed on items you can see! For example, items that are behind a block, in the grass, etc. do not display holograms until you see them.
โญ 2 modes of operation! Display holograms only on the closest items in a certain radius, or only on items that are pointed by your crosshair.
โญ Editable hologram text pattern! You can change the colors, add a prefix/postfix, add your own text, and even make the text multi-line!
โญ Fine-tuning! You can adjust the maximum distance to the item to display the hologram, limit the number of nearest items with holograms, change the font size, and many other settings!
โญ Supports multiplayer and is compatible with all other addons! (without player.json)
โญ Translated into many languages! You can even translate it into your own language!
- ใ๐ฆ๐๐ผ๐๐ป๐น๐ผ๐ฎ๐ฑ ๐๐ฃใ- required for the addon to work
- ใ๐ฆ๐๐ผ๐๐ป๐น๐ผ๐ฎ๐ฑ ๐ฅ๐ฃ ใ- required for the addon to work
Apply the addon to your world and that's it! After entering the world, the addon will start working immediately.
Note: after applying the addon, only new dropped items will have holograms. Items that were dropped before the addon was applied will not get holograms.
Raycasting! The hologram is displayed on the item only if there are no obstacles between the player and the item in a straight line:
Multiplayer is supported:
Just enter this command: /function itemsHolograms_config
And you will open the settings window for this addon:
Here you can configure:
๐ง Enable addon. Allows you to turn the addon on and off without leaving the world.
๐ง Reduce hologram font size. If enabled, the font size in the holograms will be smaller.
๐ง Raycasting. If disabled, holograms will be displayed even on items that you cannot see (behind the block, in the grass, etc.)
๐ง On which items the hologram will be displayed. You can choose "Nearest items" or "Items the crosshair is aimed at"
In "nearest" mode, holograms are displayed only on items within a certain radius. If raycasting is enabled, the visibility of items is checked before displaying holograms
Available options in "nearest" mode:
๐ง Limit the number of closest items with holograms to. You can enter any integer. The default is 10. Enter 0 for unlimited (not recommended)
๐ง Maximum distance to the item to display the hologram. You can enter any integer. The default is 12. A maximum of 50 is recommended.
In "crosshair" mode, holograms are displayed only on items that your crosshair is aimed at. Raycasting doesn't affect anything in this mode.
Available options in "crosshair" mode:
๐ง Display a hologram for the first few seconds after item drop, even if you didn't aim at it. If enabled, each item after being dropped will have a hologram for a few seconds. After that, the hologram will disappear until you aim at the item.
==={ Changing the hologram pattern }===
Enter the command /function itemsHolograms_config and scroll to the bottom:
And here you can change the pattern to your liking!
[...9999 more unique combinations]
The pattern is limited only by the number of characters (max 100) and your imagination!
โ Your Minecraft version type is "release" and version 1.20.70 or higher. Only release versions are supported, in beta versions addon was not tested, and its correct work is not guaranteed!
โ Enable these experiments: "Beta APIs"
โ Does this addon work on realms? Download the world from your realm, enable the necessary experiments, add this addon to it, and upload it back to the realm. If it still doesn't work, then it's a realm bug.
โ In multiplayer, holograms are visible to all players, even in "crosshair" mode! This is a bug and it can't be fixed yet.
โ Your addon doesn't work! Please perform all actions listed below:
- Make sure that the type of your Minecraft version is "release" (not beta or preview), and that the version matches the one indicated in the checklist above.
- Make sure that in the settings of your world, you have enabled all the experiments listed in the checklist above. If the world is uploaded to a server, check the server control panel for experiments. If they are not available there, download the world, import it into Minecraft, enable all the necessary experiments, and then upload it back to the server.
- Make sure that in the world settings, only one version of the addon is active in both "behavior packs" and "resource packs," and there are no duplicates or previous versions. If there is at least one duplicate or previous version active at the same time, the addon will not work. The same applies to the world that is uploaded to the server.
โYour addon works in a local world but does not work on the server! Make sure that you have followed all the steps in the previous point. If you are using Aternos, try "turning off and on again" the experiment toggles, as there is a known issue where they sometimes do not activate on the first attempt. Also, ensure that your hosting provider supports script execution in addons (Beta APIs).
Updated on April 28
โโโโโโใ1.20.80 SUPPORT UPDATE โ v1.2.6ใโโโโโโ
- ๐Now it supports 1.20.80!
โโโโโโใ1.20.70 SUPPORT UPDATE โ v1.2.5ใโโโโโโ
- ๐Now it supports 1.20.70!
โโโโโโใ1.20.60 SUPPORT UPDATE โ v1.2.4ใโโโโโโ
- ๐ Now it supports 1.20.60!
- โก Significant performance improvements! The rendering mechanism has been completely rewritten and now utilizes the Dynamic Properties API instead of outdated tricks with /tag to store hologram data. This has greatly enhanced performance since dynamic props are specifically designed for data storage.
- ๐ชฒ The hologram now updates when the stack quantity changes! A bug has been fixed where the hologram wouldn't update when the item quantity in the stack changed (for example, when merging individual items into a single entity).
โโโโโโใ1.20.50 SUPPORT UPDATE โ v1.2.3ใโโโโโโ
- ๐ Now it supports 1.20.50!
โโโโโโใ1.20.40 SUPPORT UPDATE โ v1.2.2ใโโโโโโ
- ๐ Now it supports 1.20.40!
- ๐ Now it supports 1.20.30+
- ๐ถ Now the addon supports almost all server hosting providers! The addon files no longer use Unicode characters, which solves all the issues with FTP clients and allows the addon to be used on virtually any server!
- ๐ฑ Updated ModBay post, updated FAQ and refreshed headers design!
- ๐ Now it supports 1.20.10+
- โญ The addon performance has been improved! The database write operation now uses the new API introduced in 1.20.10 instead of commands, which is much faster.
- โญ Adjusted the position of the ray origin when using raycast! Now it emits from the player's eye position, which greatly improves raycasting accuracy, and fixes an issue where holograms were not displayed on items that you actually see.
- ๐ Now supports 1.20.0! In this version, many changes were made to the Experimental Beta Scripting APIs. Code refactoring has been done in the addon to support 1.20.0 and the new version of the Beta APIs! (1.3.0)
- ๐ Now supports 1.19.80! In this version, many changes were made to the Experimental Beta Scripting APIs. Code refactoring has been done in the addon to support 1.19.80 and the new version of the Beta APIs! (1.2.0)
- โญ Now supports items from other addons! This addon now supports custom namespaces, which allows displaying holograms on any items, even from other addons!
- โ๏ธ Changed the link from terrible linkvertise to boostellar!